LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Seals and Gaskets >> Service and Repair >> NV241 GENII Transfer Case >> Output Shaft Extension Housing Seal - Removal

Output Shaft Extension Housing Seal - Removal






REMOVAL

1. Raise and support vehicle.
2. Remove rear propeller shaft. Drive Shaft - Removal
3. Using a suitable pry tool or slide-hammer mounted screw, remove the extension housing seal.
scientia non olet · About LEMON Manuals