LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Transmission and Drivetrain >> Clutch >> Clutch Pedal Assembly >> Service and Repair >> Clutch Pedal And Pad - Installation

Clutch Pedal And Pad - Installation






INSTALLATION

1. Place clutch pedal and bracket over studs on dash panel and cowl support. Install nuts and tighten to 39 Nm (29 ft. lbs.).
2. Engage clutch master cylinder actuator on brake pedal pivot.
scientia non olet · About LEMON Manuals