LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Idler Pulley >> Service and Repair >> Accessory Drive Idler Pulley - Installation

Accessory Drive Idler Pulley - Installation






3.8L










1. Install idler pulley (1) and pulley bolt (2). Tighten bolt to 61 Nm (45 ft. lbs.) torque.
2. install accessory drive belt.Serpentine Accessory Drive Belt - Installation.

scientia non olet · About LEMON Manuals