LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Valve >> Service and Repair >> Removal and Replacement >> Intake And Exhaust Valves - Installation

Intake And Exhaust Valves - Installation






INSTALLATION










1. Coat valve stems with clean engine oil and insert them in cylinder head.
2. Install valve spring seat on head
.




3. Install new seals on all valve stems and over valve guides Install valve springs and valve retainers
4. Install the valve springs. Valve Springs - Installation

scientia non olet · About LEMON Manuals