LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Valve Cover >> Service and Repair >> Cylinder Head Cover(s) - Removal >> Right

Right






REMOVAL










1. Disconnect negative cable from battery.
2. Disconnect spark plug wires from plugs.
3. Disconnect CCV hose from cylinder head cover.
4. Remove cylinder head cover bolts.
5. Remove cylinder head cover (1) and gasket (4).

scientia non olet · About LEMON Manuals