LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Camshaft, Lifters and Push Rods >> Rocker Arm Assembly >> Service and Repair >> Valve Rocker Arm - Assembly

Valve Rocker Arm - Assembly






ASSEMBLY

1. Install rocker arms on the shaft. Install in the original positions if re-used. Ensure the rocker shaft, all the retainers and washers are properly positioned and installed in the correct locations.
2. Install rocker arms and shaft to the cylinder head. Valve Rocker Arm - Installation
scientia non olet · About LEMON Manuals