LEMON Manuals: Even more car manuals for everyone

Home >> Jeep >> 2011 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Body and Frame >> Bumper >> Rear Bumper >> Service and Repair >> Rear Bumper - Installation

Rear Bumper - Installation

INSTALLATION

1. Install the bumper (4) and install the bolts (1) and (3).
2. Tighten the bolts (1) and (3) to 25 Nm (18.5 ft. lbs.).

scientia non olet · About LEMON Manuals