Grille, Defroster: Removal: Removal
CAUTION:
Carefully disengage the retaining clips on the defroster grille, make sure the tool does not scratch the instrument panel assembly while removing.
- Before proceeding with the following repair procedure, review all warnings and cautions. Refer to Instrument Panel, Warning .
- Using trim stick (special tool #C-4755, Trim Stick) or equivalent, separate the five cluster bezel clips (5) along the back edge of the driver side defroster grille (1).
- Using trim stick (special tool #C-4755, Trim Stick) or equivalent, separate the clips securing the defroster grille (1) to the passenger side defroster grille (3).
- Pull the defroster grille (1) rearward and separate the front clips (6) securing the grille to the instrument panel and remove the grille.
- Using trim stick (special tool #C-4755, Trim Stick) or equivalent, separate the four clips (4) along the front edge of the passenger side defroster grille (3).
- Pull the defroster grille (3) rearward and separate the front clips (2) securing the grille to the instrument panel.
- Remove the grille.