Cover, Seat Cushion, Front: Removal: Removal

Fig 1: Bolts, Seat Cushion Bushings And Straps

Courtesy of CHRYSLER LLC

1. Before proceeding with the following repair procedure, review all warnings and cautions. Refer to Seats, Warning .
2. Move the seat to the forward position and disconnect and isolate the negative battery cable.
3. Remove the bolts (2) and the straps (1).
4. Disconnect the electrical connector, if equipped.
   Fig 2: Seat Cushion Removal

   Courtesy of CHRYSLER LLC
5. Lift the front of the seat cushion (2) up and slide out from under the seat back cushion (1).