LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Compass 2WD L4-2.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Idler Pulley >> Service and Repair >> Accessory Drive Idler Pulley - Installation

Accessory Drive Idler Pulley - Installation






INSTALLATION




ACCESSORY DRIVE BELT - WORLD ENGINE
1. Position pulley (5 or 9) in mounting position. Install idler pulley mounting bolt. Tighten bolt to 48 Nm (35 ft. lbs.).
2. Install accessory drive belt (2) Serpentine Accessory Drive Belt - Installation.
3. Install belt splash shield.
4. Lower vehicle.

scientia non olet · About LEMON Manuals