HEADER, Folding Top: Removal: Removal

Fig 1: Header Assembly

Courtesy of CHRYSLER LLC

Release and fold back the soft top header assembly (1) to the vehicle.

Fig 2: Screws & Header Seal Plate
Courtesy of CHRYSLER LLC

NOTE: When removing the screws remember their locations because they will differ in size and style.
Carefully remove the screws (1) at each end (side) of the header seal plate (2).

Fig 3: Screws & Header Assembly
Courtesy of CHRYSLER LLC
Remove the screws (1) under the flange on the left and right sides of the header assembly (2).

Fig 4: Screws & Upper Header Assembly
Courtesy of CHRYSLER LLC
Remove the two screws (1) on the upper header assembly (2) from both sides.

Fig 5: Header Assembly & Fasteners
Courtesy of CHRYSLER LLC
Remove the header assembly and all remaining fasteners (1).
Remove the windshield header seal plate from the soft top.