LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Sunroof >> SWITCH, Sunroof >> Diagnosis and Testing >> Control Switch

Control Switch

The following test will determine if the sunroof control switch is operating properly.

  1. Remove the overhead console from the headliner. Refer to Electrical/Overhead Console - Removal .
  2. Remove the sunroof control switch from the overhead console. See Body/Sunroof/SWITCH, Sunroof - Removal .
  3. Using an ohmmeter, test the switch terminals for proper continuity using the table below. If any of the terminals do not show proper continuity, replace the sunroof control switch.
SWITCH POSITION (DEPRESSED) CONTINUITY BETWEEN TERMINALS
VENT (V) 3, 4
OPEN (AUTO) 1, 4
CLOSE 2, 4