Manual Operation

Fig 1: Rear Drive Motor, Front Drive Motor, Drive Axle Location & Hex Socket

Courtesy of CHRYSLER LLC

1 - REAR DRIVE MOTOR

2 - FRONT DRIVE MOTOR

3 - DRIVE AXLE LOCATION

4 - 6 mm HEX SOCKET

Remove the rear dome light. Refer to Electrical/Lamps/Lighting - Interior/LAMP, Dome - Removal
Disconnect the grey module electrical connector.
Locate the motor drive axle hole (3), using a 6 mm hex socket or equivalent (4), open or close the desired drive assembly as required.