Right

RIGHT SIDE

1. Remove the air box Air Cleaner - Removal.
2. Remove the four upper shock mounting nuts.
3. Raise and support the vehicle.
4. Remove the right side tire assembly.
5. Remove the caliper and support Disc Brake Caliper - Removal.




6. Remove the lower bolt (4) at the lower control arm securing the clevis bracket (3).





7. Remove the stabilizer link bolt (2) at the lower control arm Front Stabilizer Bar Link - Removal.





8. Remove the upper ball joint nut.
9. Separate the upper ball joint from the knuckle (3) using remover 9360 (2).





10. Pull downward on the knuckle and support the knuckle (4) to allow access.
11. Remove the shock assembly (1) from the vehicle.
12. Remove the spring from the shock (if needed). Front Coil Spring - Removal.