LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Liberty 4WD V6-3.7L >> Repair and Diagnosis >> Instrument Panel, Gauges and Warning Indicators >> Sensors and Switches - Instrument Panel >> Fuel Gauge Sender >> Service and Repair >> Fuel Level Sending Unit and Sensor - Removal

Fuel Level Sending Unit and Sensor - Removal






REMOVAL





1. Drain and remove fuel tank (4).

2. Remove the fuel pump module Fuel Tank - Removal
3. Remove the fuel level sending unit.
scientia non olet · About LEMON Manuals