LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Liberty 4WD V6-3.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Idler Pulley >> Service and Repair >> Accessory Drive Idler Pulley - Installation

Accessory Drive Idler Pulley - Installation






3.7L ENGINE










1. Install pulley and pulley bolt to tensioner. Tighten bolt to 61 Nm (45 ft. lbs.) torque.
2. install accessory drive belt.Serpentine Accessory Drive Belt - Installation.

scientia non olet · About LEMON Manuals