LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Liberty 4WD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Sensors and Switches - Body and Frame >> Sunroof / Moonroof Switch >> Testing and Inspection >> Switch, Control Switch

Switch, Control Switch






CONTROL SWITCH

The following test will determine if the sunroof control switch is operating properly.

1. Remove the overhead console from the headliner, Overhead Console - Removal.
2. Remove the sunroof control switch from the overhead console, Sunroof Switch - Removal.
3. Using an ohmmeter, test the switch terminals for proper continuity using the table below. If any of the terminals do not show proper continuity, replace the sunroof control switch.