LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Liberty 4WD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Sensors and Switches - Body and Frame >> Sunroof / Moonroof Switch >> Service and Repair >> Sunroof Switch - Removal

Sunroof Switch - Removal






REMOVAL

1. Disconnect and isolate the negative battery cable.
2. Remove the overhead console from the headliner, Overhead Console - Removal.
3. Disconnect the sunroof control switch electrical connector. Depress the connector retaining tab and pull the connector straight out.
4. To remove the switch from the overhead console, push on the back of the switch until it comes free from the overhead console.