Front Bumper Fascia - Removal

REMOVAL

Compass and Patriot





1. Remove the fascia (2) to splash shield screws (1).





2. Remove the lower fasteners (4) and disconnect the electrical connectors (2 and 3).

Compass





1. Remove the fasteners (1 and 2).
2. Remove the push pin fasteners (3).
3. Loosen the fasteners (5 and 6) and remove the fascia (4).

Patriot





1. Remove the push pin fasteners (6) from the wheel wells.
2. Remove the screws (5) from the wheel wells.
3. Remove the screws (3).
4. Remove the push pin fasteners (1 and 2) and remove the fascia (4).