LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Compass 2WD L4-2.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Mount >> Service and Repair >> Engine Mount Insulator - Removal >> Rear

Rear






REMOVAL





1. Remove rear mount retaining bolts (4).
2. Remove rear mount through bolt (1).
3. Remove oxygen sensor connector (2) from mount.
4. Remove rear mount (3).

scientia non olet · About LEMON Manuals