Exhaust Tailpipe - Installation

5.7L ENGINE










1. Position the tailpipe/resonator assembly (5) in vehicle.
2. Install tailpipe/resonator insulators (3).
3. Install new gasket and tailpipe/resonator to muffler flange nuts and bolts. Tighten to 47 Nm (35 ft. lbs.).
4. Make sure the tailpipe/resonator assembly (5) is correctly positioned and the properly aligned. The minimum clearance between components is 25mm (1 inch).
5. Lower the vehicle.
6. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.