LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - HVAC >> Blower Motor Relay >> Description and Operation >> Rear Blower Motor Relay - Description

Rear Blower Motor Relay - Description






DESCRIPTION





The blower motor relay (1) for the rear heating-A/C system is an International Standards Organization (ISO)-type relay. Relays conforming to the ISO specifications have common physical dimensions, current capacities, terminal functions and patterns (2). The rear blower motor relay is a electromechanical device that switches battery current through a fuse in the power distribution center (PDC) directly to the rear blower motor when equipped with the manual temperature control (MTC) system. The rear blower motor relay is energized when the relay coil is provided battery current by the rear A/C-heater control switch located in the dash panel A/C and Heater Control - Description.

The rear blower motor relay is located in top side of the fuse block in the passenger compartment.