LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Exhaust System >> Exhaust Pipe >> Service and Repair >> Exhaust Tailpipe - Removal

Exhaust Tailpipe - Removal






5.7L ENGINE










1. Raise the vehicle and support the rear of the vehicle by the side rails and allow the axle to hang free.
2. Saturate the bolts and nuts with heat valve lubricant. Allow 5 minutes for penetration.
3. Remove rear tailpipe isolators.
4. Remove the tailpipe/resonator to muffler assembly flange nuts.
5. Remove tailpipe and resonator assembly from vehicle (5).