LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Accessory Drive Belt Tensioner - Installation

Accessory Drive Belt Tensioner - Installation






5.7L ENGINE










1. Align locator tang on tensioner with slot in front cover.
2. Install tensioner (1) and mounting bolt (2) to front cover. Tighten bolt to 41 Nm (30 ft. lbs.).
3. Install accessory drive belt Serpentine Accessory Drive Belt - Installation

scientia non olet · About LEMON Manuals