Inner Tie Rod End

INNER TIE ROD






NOTE: Count the number of turns when removing, this will aid in setting the toe after installation.

1. Remove the outer tie rod end (2) Tie Rod End - Removal.
2. Remove the jam nut (3).





3. Remove the two clamps (1, 3) for the inner tie rod boot (2).
4. Remove the boot (2) from the tie rod.





5. Install the Inner Tie Rod Socket 10087- 7 (1) and Inner Tie Rod Adapter Wrench 10087-2 (2) and remove the inner tie rod end.