Sunroof Switch - Removal

REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Remove the courtesy/reading lamp lens (5). Insert a suitable flat bladed tool into the slot (6) in the courtesy/reading lamp assembly (2). Pivot the lens down and to the left to release the holding tab (4).





3. Using a suitable flat bladed tool, release the mounting tabs (5) from the sides of the sunroof control switch (4) and pull the switch down from the courtesy/reading lamp assembly (2).





4. Disconnect the electrical connector (3) from the sunroof control switch (4).
5. Remove the switch from the vehicle.