Gap And Flush: Compass
NOTE:
All dimensions are in millimeters.
- O/F = Over Flush
- U/F = Under Flush
- U/D = Up/Down
- F/A = Fore/Aft
GAP AND FLUSH MEASUREMENTS
| Dimension | Description | Gap | Flush |
|---|---|---|---|
| 1 | Fascia to hood | 8.0 +/- 1.5 Parallel within 2.0 |
Fascia u/f 1.0 +/- 1.5 Consistent within 2.0 |
| 2 | Fender to hood | 6.0 +/- 1.5 Parallel within 1.5 |
-- |
| 3 | Hood to body side aperture (a-pillar) | 6.7 +/- 1.5 Parallel within 1.5 |
-- |
| 4 | Body side aperture (a-pillar) to fender | 6.0 +/- 1.5 Parallel within 1.5 |
-- |
| 5 | Door header to body side aperture | 4.5 +/- 1.2 Parallel within 1.2 |
Header u/f 1.5 +/- 1.2 Consistent within 1.5 |
| 6 | Fuel filler door to body side | 3.0 +/- 0.8 Parallel within 0.75 |
Fuel door u/f 0.5 +/- 1.0 Consistent within 1.0 |
| 7 | Front door to rear door (below belt) | 4.5 +/- 1.2 Parallel within 1.5 |
Front door o/f 1.0 +/- 1.0 Consistent within 2.0 |
| 8 | Front door to rear door (above belt) | 4.5 +/- 1.2 Parallel within 1.2 |
Header u/f 1.5 +/-1.2 Consistent within 1.5 |
| 9 | Fender to front door | 4.5 +/- 1.0 Parallel within 1.5 |
Fender o/f 1.0 +/- 1.0 Consistent within 1.0 |
| 10 | Fascia to fender | Between side marker and wheelhouse net to 1.0 between headlamp and side marker 2.0 +/- 2.0 | Fascia u/f 1.0 +/- 1.0 Consistent within 1.5 |
| 11 | Rear door to body side aperture | 4.5 +/- 1.2 Parallel within 1.2 |
+/- 1.0 Consistent within 1.5 |
| 12 | Body side aperture to front and rear doors | 6.0 +/- 2.0 | -- |
| 13 | Fascia to body side aperture | Net to 1.0 | Fascia u/f 1.0 +/- 1.0 Consistent within 1.5 |
| 14 | Tail lamp to liftgate | 4.0 +/- 2.0 Parallel within 2.0 Symmetrical within 2.0 lh to rh |
Lamp o/f 1.0 +/- 2.0 |
| 15 | Fascia to liftgate | Cross/car 4.0 +/- 2.0 | -- |
| 16 | Tail lamp to fascia | 1.5 +2.0/-1.5 Parallel within 2.0 Symmetrical within 2.0 rh to lh |
0.0 +/- 2.0 |
| 17 | Liftgate to roof | 6.0 +/- 1.5 Parallel within 2.0 |
Liftgate u/f 1.0 +/- 1.2 Consistent within 2.0 |