LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Overland, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Decklid/Hatch/Liftgate/Tailgate >> STRIKER, Latch >> Adjustments >> Adjustment

STRIKER, Latch: Adjustments: Adjustment

Fig 1: STRIKER
GC0119254Courtesy of CHRYSLER LLC
  1. Using a grease pencil or equivalent, mark the position of the striker (1) to aid in adjustment.
  2. Loosen the striker bolts (2).
  3. Change the striker position to adjust the lower liftgate gap and flush measurement. See Body/Body Structure/Gap and Flush - Specifications 
  4. Tighten the bolts to 28 N.m (21 ft. lbs.).
scientia non olet · About LEMON Manuals