LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander 4WD V8-4.7L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Body and Frame >> Sunroof / Moonroof Switch >> Service and Repair >> Sunroof Switch - Installation

Sunroof Switch - Installation






INSTALLATION





1. Position the sunroof switch (4) onto the overhead console.
2. Install the screws (3) securing the switch (4) to the overhead console.
3. Install the overhead console into the vehicle, Overhead Console - Installation.
4. Connect the battery negative cable.

scientia non olet · About LEMON Manuals