LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander 4WD V8-4.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Brake Caliper >> Service and Repair >> Removal and Replacement >> Disc Brake Caliper Adapter - Installation

Disc Brake Caliper Adapter - Installation






INSTALLATION










1. Install the caliper adapter mounting bolts (3). Tighten the mounting bolts to 169 Nm (125 ft.lbs).
2. Install the inboard and outboard pads. Brake Pads - Installation.





3. Install the caliper (1) Disc Brake Caliper - Installation.
4. Install the tire and wheel assembly. Removal and Replacement.

scientia non olet · About LEMON Manuals