Left Side

LEFT SIDE

NOTE: All torques should be done with vehicle on the ground with full vehicle weight.










1. Position the lower suspension arm (9) in the frame rail.
2. Install the frame rail bracket bolt (8) and nut (1) tighten to176 Nm (130 ft. lbs.).










3. Position the lower suspension arm(3) in the axle bracket.
4. Install the axle bracket bolt (1) and nut (2) Tighten to 210 Nm (155 ft. lbs.).
5. Install the fuel tank Fuel Tank - Installation.
6. Remove the supports and lower the vehicle.