LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Intake Manifold >> Service and Repair >> Removal and Replacement >> Intake Manifold - Removal

Intake Manifold - Removal






REMOVAL





1. Disconnect negative cable from battery (4).
2. Remove air cleaner assembly Air Cleaner Body - Removal.
3. Disconnect electrical connectors and reposition harness.
4. Disconnect vacuum lines.
5. Perform fuel pressure release procedureService and Repair.
6. Remove intake manifold retaining fasteners.
7. Remove intake manifold.

scientia non olet · About LEMON Manuals