LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Parking Brake System >> Parking Brake Lever >> Service and Repair >> Removal

Removal






REMOVAL





1. Remove the console rear cover (2) or DVD player (if equipped).





2. Remove the center console (1),Floor Console - Removal.

3. Disconnect the park brake switch wire connector.
4. Lock out the park brake hand lever.









5. Disconnect the front cable (3) at the hand brake lever (1).
6. Remove the 3 hand brake lever mounting bolts.
7. Disconnect the wire harness routing clips to the lever.
8. Pull the hand lever (1) up to remove the front cable (3).