LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Body and Frame >> Sunroof / Moonroof Switch >> Service and Repair >> Sunroof Switch - Removal

Sunroof Switch - Removal






REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Remove the overhead console from the vehicle, Overhead Console - Removal.
3. Remove the screws (3) attaching the switch (4) to the overhead console.
4. Remove the switch (4) from the overhead console.