LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Trim Panel >> Service and Repair >> Load Floor Latch - Removal

Load Floor Latch - Removal






REMOVAL

1. Remove the load floor, Load Floor - Removal.




2. On 2005-2006 vehicles, twist the springs (2) off the latch legs (1) and remove the latch(es) (3).





3. On 2007 and later vehicles, release the tabs (2) on the load floor latch(es) (1) and separate from the load floor (3).