LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Exhaust System & Turbocharger >> Sensor-Diesel Exhaust Temperature >> Installation >> Exhaust Temperature Sensor-Installation

Exhaust Temperature Sensor-Installation

Fig 1: EXHAUST TEMPERATURE SENSOR - DPF
GC0055377Courtesy of CHRYSLER LLC
1 - Upstream DPF Temperature Sensor Electrical Connector
2 - Upstream DPF Temperature Sensor
3 - Downstream DPF Temperature Sensor
4 - Upstream DPF Temperature Sensor Electrical Connector
  1. Position DPF downstream temperature sensor into DPF. Tighten to 25 N.m (221 in. lbs.).
  2. Connect downstream temperature sensor electrical connector.
  3. Position DPF upstream temperature sensor into DPF. Tighten to 25 N.m (221 in. lbs.).
  4. Connect upstream temperature sensor electrical connector.
  5. Install engine cover.
scientia non olet · About LEMON Manuals