Body - Interior & Exterior: Liftgate: Hinge: Removal: Hinge

Fig 1: Liftgate Harness

Courtesy of CHRYSLER LLC

NOTE: It is not necessary to remove the liftgate to replace one or both hinges. The hinges can be replaced one at a time.

NOTE: A suitable body sealant should be used when removing or moving the hinges.

1. Support liftgate on a suitable lifting device.
2. Disconnect liftgate harness and washer hose.
   Fig 2: Hinge

   Courtesy of CHRYSLER LLC
3. Using a grease pencil or equivalent, mark the location of the hinge to aid installation.
4. Remove the two bolts that secure the liftgate hinge (1) to the liftgate.
   Fig 3: Locating Nuts And Bolt

   Courtesy of CHRYSLER LLC
5. Carefully, move down headliner and remove two nuts and one fastener. Remove hinge from vehicle.