LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass Limited, AWD, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine & Automatic Transmission Cooling System) >> Engine >> SENSOR, Coolant Temperature >> Installation >> Gas Engine >> Coolant Adapter Mounted

Coolant Adapter Mounted

WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ECT & Coolant Adapter
GC0083975Courtesy of CHRYSLER LLC
1 - ECT
2 - COOLANT ADAPTER
  1. Install ECT Sensor (1). Make sure coolant sensor is locked in place
  2. Reconnect ECT Sensor electrical connector.
  3. Fill cooling system. See Standard Procedure  .
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals