LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass Limited, AWD, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine & Automatic Transmission Cooling System) >> Engine >> PUMP, Water >> Disassembly >> Water Pump - Gas Engine

Water Pump - Gas Engine

WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Water Pump Pulley
GC0098471Courtesy of CHRYSLER LLC
  1. Remove the water pump assembly from the vehicle. See Removal 
  2. Discard the water pump outlet gasket (7).
  3. Remove the three bolts (1) attaching the water pump pulley (2) to the water pump (4).
  4. Remove the water pump pulley (2).
  5. Remove the five bolts (3) attaching the water pump (4) to the water pump adapter (6).
  6. Remove and discard the gasket (8).
  7. Remove the water pump (4) and inspect carefully for any damage. See Inspection 
scientia non olet · About LEMON Manuals