LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass Limited, AWD, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine & Automatic Transmission Cooling System) >> Accessory Drive >> TENSIONER, Belt >> Removal >> Gas Engine

Gas Engine

WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Splash Shield
GC0098462Courtesy of CHRYSLER LLC
  1. Raise vehicle on hoist.
  2. Remove belt splash shield (3).
    Fig 2: Identifying Accessory Drive Belt
    GC0083970Courtesy of CHRYSLER LLC
    1 - POWER STEERING PUMP
    2 - ACCESSORY DRIVE BELT
    3 - GENERATOR
    4 - CRANKSHAFT PULLEY
    5 - LOWER IDLER PULLEY
    6 - CRANKSHAFT PULLEY
    7 - WATER PUMP PULLEY
    8 - ACCESSORY DRIVE BELT TENSIONER
    9 - UPPER IDLER PULLEY
  3. Remove accessory drive belt. See Removal  .
  4. Remove accessory drive belt tensioner mounting bolt. Remove accessory drive belt tensioner (8).