LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass Limited, AWD, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine & Automatic Transmission Cooling System) >> Accessory Drive >> TENSIONER, Belt >> Installation >> Gas Engine

Gas Engine

WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Accessory Drive Belt
GC0083970Courtesy of CHRYSLER LLC
  1. Position accessory drive belt tensioner (8) and install mounting bolt (1). Tighten bolt (1) to 24 N.m (212 in. lbs.).
  2. Install accessory drive belt (2). See Installation  .
    Fig 2: Splash Shield
    GC0098462Courtesy of CHRYSLER LLC
  3. Install belt splash shield (3).
  4. Lower vehicle.
scientia non olet · About LEMON Manuals