BELT, Serpentine: Installation: Diesel
WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When installing accessory drive belt, be sure belt is routed around all accessories correctly.
- Install belt over all pulleys except for the power steering pump pulley (5). See Removal .
- Using a wrench, rotate belt tensioner (8) clockwise until belt can be installed onto power steering pump pulley (5). Release spring tension onto belt.
- Install belt splash shield. See Removal .
- Lower vehicle from hoist.