LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass Limited, AWD, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Rack & Pinion Power Steering System) >> Pump >> HOSE, Power Steering, Supply >> Removal >> Diesel Engine

Diesel Engine

WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before proceeding. See Warning  .
  1. Remove the engine top appearance cover.
  2. Siphon as much fluid as possible from power steering fluid reservoir.
    Fig 1: Hose Clamp And Supply Hose
    GC0082523Courtesy of CHRYSLER LLC
  3. Remove the clamp (3) securing the supply hose (1) to the power steering pump supply fitting (2), then remove the hose from the fitting.
    Fig 2: Fluid Reservoir
    GC0082527Courtesy of CHRYSLER LLC
  4. Remove the hose clamp (4) securing supply hose to the power steering fluid reservoir (5). Slide the hose off the end of the reservoir fitting and remove from vehicle.