LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass Limited, AWD, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Rack & Pinion Power Steering System) >> Pump >> HOSE, Power Steering, Pressure >> Removal >> Diesel Engine - Right-Hand-Drive

Diesel Engine - Right-Hand-Drive

WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Before proceeding. See Warning  .
  1. Siphon as much fluid as possible from power steering fluid reservoir.
  2. Remove the engine appearance cover.
    Fig 1: Pump Pressure Line And Pump Pressure Port
    GC0082522Courtesy of CHRYSLER LLC
  3. Remove the pressure line (3) at the pump (4).
  4. Remove the pressure line routing bracket bolt (2) at the upper mount (7).
    Fig 2: Hoses At RHD Gear
    GC0098924Courtesy of CHRYSLER LLC
  5. Raise and support the vehicle. Refer to Vehicle Quick Reference/Hoisting - Standard Procedure
  6. Unthread the tube nut (2) and remove the pressure hose (2) at the steering gear.
  7. Remove the power steering pressure hose from the vehicle.