LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass Limited, AWD, Automatic CVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Frames & Bumpers) >> Frame >> Standard Procedure >> Front Frame Rail Tip Replacement >> Mark Existing Rail As Follows: >> Right side

Right side

WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Right Side Rail
GC0084291Courtesy of CHRYSLER LLC
1 - INNER RAIL
2 - CONTINUE MARK FROM INNER RAIL
3 - OUTER RAIL
4 - MARK LOCATION 50 mm (2 in)
  1. On inner rail (1), mark at 50 mm (2 in) (4) forward of the leading edge of flanged hole in rail.
  2. On outer rail (3), continue mark (2) from inner rail.