LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass Limited, AWD, Automatic CVT >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Exhaust System & Turbocharger >> Turbocharger System >> Cooler-Charge Air And Hoses >> Installation >> Charge Air Cooler-Hoses >> Hose - Turbocharger To Charge Air Cooler

Hose - Turbocharger To Charge Air Cooler

Fig 1: Intake Air Temperature Sensor - 2.4L Turbo
GC0019359Courtesy of CHRYSLER LLC
1 - HOSE - CHARGE AIR COOLER TO THROTTLE BODY
2 - IAT SENSOR
3 - TIP HOSE
  1. Position hose to mounting location.
  2. Temporarily install nuts securing charge air cooler hose to structural collar.
  3. Connect hose to turbocharger.
  4. Connect hose to charge air cooler.
  5. Tighten hose clamps to 1.7 N.m (15 in. lbs.).
  6. Tighten nuts securing charge air cooler hose to structural collar.
  7. Lower vehicle.
scientia non olet · About LEMON Manuals