LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass 4WD L4-2.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Idler Pulley >> Service and Repair >> Idler Pulley - Installation

Idler Pulley - Installation







INSTALLATION




ACCESSORY DRIVE BELT - WORLD ENGINE





1. Position pulley (5 or 9) in mounting position. Install idler pulley mounting bolt. Tighten bolt to 48 Nm (35 ft. lbs.).
2. Install accessory drive belt Accessory Drive Belt - Installation.
3. Install belt splash shield.
4. Lower vehicle.
scientia non olet · About LEMON Manuals