LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass 4WD L4-2.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Mount >> Service and Repair >> Engine Mount - Installation >> Right Engine Mount

Right Engine Mount







INSTALLATION





1. Position right engine mount (1).
2. Install engine mount retaining bolts and tighten to 75 Nm (55 ft. lbs.).
3. Install engine mount adapter (2) and tighten bolts (3) to 68 Nm (50 ft. lbs.).
4. Install engine mount through bolt (4) and tighten to 88 Nm (65 ft. lbs.).




5. Remove jack.
6. Install power steering line support bracket (1) at engine mount.




7. Install windshield washer bottle (1).
8. Install power steering reservoir (2).
9. Install coolant reservoir (3).
10. Install engine cover.
scientia non olet · About LEMON Manuals