LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass 4WD L4-2.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Mount >> Service and Repair >> Engine Mount - Installation >> Left Engine Mount

Left Engine Mount







INSTALLATION





1. Position mount (2) in place.
2. Install left mount to frame rail bolts (1) and torque to 75 Nm (55 ft. lbs.).
3. Install mount through bolt (3) and torque to 100 Nm (74 ft.lbs.).
4. Remove jack.




5. Install PCM mounting bracket.
6. Install PCM (1).
7. Connect negative cable to battery (3).




8. Install air cleaner housing (1) and air cleaner inlet (2).
scientia non olet · About LEMON Manuals