LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass 4WD L4-2.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Engine Mount >> Service and Repair >> Engine Mount - Installation >> Front Engine Mount

Front Engine Mount







INSTALLATION





1. Position mount (4) and torque bolts to 47 Nm (35 ft. lbs.).
2. Install fore aft member (3) and torque bolts to 100 Nm (74 ft. lbs.).
3. Install mount through bolt (1) and torque to 47 Nm (35 ft. lbs.).
4. Lower vehicle.
scientia non olet · About LEMON Manuals